How to refill your Seaborn bottle in three easy steps

Refilling your Seaborn bottle takes a couple of minutes of effort and a little patience. Here is exactly how to do it, plus a few tips to get the best foam.

What you need

• Your Seaborn foaming bottle (500 ml)
• One Seaborn refill packet (each packet contains 2 tablets and makes one full bottle)
• Normal tap water

Step 1: Fill with water

Unscrew the pump and fill the bottle with tap water. Leave a little space at the top so the pump can sit back in place.

Step 2: Drop in two tablets

Open your refill packet and drop both tablets into the water. Put the pump back on loosely.

Step 3: Wait, then foam

Give the tablets about 25 minutes to dissolve fully. Once the water is clear of any pieces, tighten the pump and give the bottle a gentle swirl. That is it: a full bottle of foaming hand soap.

Fill, drop, wait, foam.

Tips for the best results

• Be patient. If you pump before the tablets have fully dissolved, the first few pumps may be watery.
• Swirl, do not shake. Shaking hard creates bubbles inside the bottle. A gentle swirl is all it needs.
• Rinse between refills. Every few refills, rinse the empty bottle and pump with warm water to keep the pump working smoothly.
• Mix it up. Each refill can be a different scent. Try North Wind, Rain Lilies, River Moss, or Sensitive+.

Running low? Stock up on refills, or join the Refill Club and have them delivered on your schedule.